Trinocular Microscope

LABOID Trinocular Coaxial Microscope availed by us is especially designed for the study microorganism and microstructures in forensic labs, medical applications, school and university laboratories. The frame is fabricated by using best grade aluminium with the help of pressurized die casting process and is also provided with a Polyurethane coating to prevent surface damage. Trinocular Coaxial Microscope offered by us has a quadruple nose with a binocular head which is capable to rotate around 360 degrees and can be inclined up to about 45 degrees. The prism and the lenses fixed in the device is coated with anti-fungus coating.

Introduction :
Laboid C Shaped, Highly rigid, vibration five aluminium allay casting with transmitted light, power supply brightness control integrated in the base. The Frame with hollow design is lightweight but stable, strong easy to carry misty gray P.V Paint with blue flaps both sides, is fresh and vivid design.

Viewing Head :
45 degree Trinocular Head  with antifungal coated prism.

Nose piece :
Ball Bearing loaded, inward quadruple nose piece with precise, positive stops for centred alignment of objectives.

Objectives :
Achromatic ( Anti fungus coated, scratch Proof ) objective 4x, 10x, 40x , 100x oil immersion.

Stage :
Graduated double layer Mechanical stage size 140x132mm With cross travel 90mm x 65mm(4) On ball bearing with co-axial control.

Focusing movement :
Coaxial Coarse and fine adjustment with tightness adjustment range 25mm. Precision: 0.002mm.

Condenses :
N.A 1.25 abbe condenser with iris diaphragm, swing in and out fitter holder.

Light Source :
illumination system LED 3.5w 3v with intensity control regulator, Universal Power supply 110 v- 240v.